- Angle bars
Cross section of angle bars produced by Baku Steel Company CJSC ranges from 40 to 125 mm with a length between 3,000 to 12,000 mm as required by the standard. Ready products are tied in 3000-5000 kg bundles at the customers' request. Labels on the bundles contain information about the steel brand, standard, cross-section, heat number, length, weight, and other parameters of an angle.
- I-beams
I-beams produced by Baku Steel Company CJSC have a cross-section of 100-160 mm and length in the range of 3000 - 12000 mm depending on the requirements of the standard. Ready products are tied in 3000-5000 kg bundles at the customers' request. Labels on the bundles contain information about steel brand, standard, cross-section, heat or batch number, length, weight, and other parameters of the steel used for the I-beams manufacturing.
- Сhannels
The cross-section of channels produced by Baku Steel Company CJSC is 80-160 mm, and the length is 2000-12000 mm according to the requirements of the standard. Channels can be made longer at the customer’s orders. Channels are tied in 3000-5000 kg bundles. Labels on the channel bundles contain information about the steel brand, standard, cross-section, heat number, length, weight, and other parameters.
- Square rods
Square rods produced by Baku Steel Company CJSC in compliance with the requirements of GOST 535-2005, GOST 2591-88, and GOST 380-2005 have the following sizes: cross-section range - 10x10, 12x12, 14x14, 16x16, 18x18, 20x20, 22x22, 24x24 mm; length range - 3000-12000 mm; weight range - 3000-5000 kg. Labels on the ready products contain information about the fabrication standard, steel brand, heat or batch number, diameter, length, weight, and other parameters of the rods.
- Round rods
Round rods with a smooth surface manufactured by Baku Steel Company CJSC in accordance with the standards GOST 535-2005, GOST 2590-2006, GOST 380-2005, diameter 10-28 mm, length 3000-12000 mm, in bundles weighing up to 3000- 5000 kg. Labels affixed to the bundles include information about the fabrication standard, steel grade, melt or batch number, diameter, length, weight, and other parameters of the rods.
